EnSolv-Fluoro

Introduction

EnSolv Fluoro is a VOC exempt solvent that can be used neat in light cleaning or as a rinsing agent. Acting as a co-solvent it can add positive characteristics to heavy-duty cleaning blends. It was designed as an ideal substitute for solvents like Chemours Vertrel®, 3M Novec® (including 3M Novec 7100 & 7200), Honeywell’s Solstice, HCFC-225 and others.

Features & Benefits

• Zero Surface Residue
• Low Surface Tension
• Low Viscosity
• NON-Flammable
• NO Flash Point
• VOC Exempt
• High Boiling

Environmental Properties

• Zero Ozone Depletion Potential
• GWP of 580

Applications

EnSolv Fluoro can be used as a light duty cleaner, co-solvent, and a carrier fluid for deposition of materials such as silicone and other lubricants. Its quick evaporation rate and preferable environmental properties make this an ideal solvent for use in certain industries. It can also be used as a heat transfer fluid, due to its non-flammability. It can replace HFC, CFC and HCFC in many applications.

EnSolv Fluoro is for INDUSTRIAL USE only. It is not designed for consumer use.

Storage and Handling

EnSolv Fluoro is thermally stable and will not oxidize or degrade during storage under normal conditions. It is recommended to store the product inside a clean, dry area and out of direct sunlight or other heat sources. Do not freeze or store below
32°F (0°C) nor above 90°F (32°C) to prevent leakage or potential rupture of container due to contraction/expansion and pressure changes. Drum pumps are recommended to dispense the solvent from its container. Refer to the Safety Data
Sheet for more information or contact Enviro Tech for further assistance