--- title: "Vapor Degreaser Location: 5 Questions to Ask | Enviro Tech" description: "Planning where to install a vapor degreaser? Get answers to the five key questions about choosing the ideal location for your vapor degreasing system." image: "https://origin-www.envirotechint.com/wp-content/uploads/2022/03/qtq80-jxWvbS.jpeg" --- ### Five Questions To Ask When Choosing The Location For A Vapor Degreaser You’ve committed to vapor degreasing, and the efficiency of your operation is about to improve significantly. But first, you must decide where in your facility to install a vapor degreaser system. You have plenty to consider, and we’re here to help you choose the ideal spot. The following are our answers to the top five questions about choosing a vapor degreaser location. ### A Quick Rundown As you consider where to place a vapor degreaser, here’s a quick refresher on this **[solvent-based finishing process](https://envirotechint.com/vapor-degreaser-explained/)**and why it’s a good choice. Vapor degreasers work by coating machinery parts and components in a degreasing solvent that is suspended in heated vapor. When the vapor cools, the degreasing agent — along with any grease or soil — drips down into a reservoir below, leaving the parts clean and dry. This process gets deep into the hard-to-reach crevices of manufactured parts, making it one of the most effective and efficient ways to ensure that they are thoroughly cleaned. ### Considerations to Keep in Mind These five questions should be at the top of your list as you seek an appropriate location for a vapor degreaser. 1. **How is the ventilation in my facility?** This is a very important consideration because solvent vapors can be very dangerous if not properly routed. We recommend placing your vapor degreaser where you can leverage a floor draft, because most solvent vapors are heavier than air. Also be aware of any cross drafts created by air conditioners, doors, fans and other vents. 2. **Where can I best control humidity levels?** For many, this is an afterthought. However, humidity can significantly impact the effectiveness of your vapor degreaser. Not only can water compromise the solvent, but in some blends, it can result in acidity. We recommend taking steps to enclose your vapor degreaser in a humidity-controlled area. 3. **How much space do I need?** Don’t base your space calculation solely on the vapor degreaser equipment. We recommend factoring in additional square footage for loading and unloading as well as access for general repairs and maintenance. Make sure you’ve also left enough space for emergency shutoff equipment. 4. **Where should it be located?** A vapor degreaser is designed to increase efficiency, so we recommend placing it as close to your work area as possible, keeping in mind restrictions related to space and safety. 5. **Am I being safe enough?** Safety concerns are a necessary part of every manufacturing decision. Your vapor degreaser should be positioned so as not to hinder an emergency evacuation or response. We recommend consulting with your fire marshal and insurance provider to ensure you are in full compliance with safety codes. Enviro Tech can help you determine the optimal vapor degreaser location for your facility, but that’s just the start. We also supply top-quality vapor degreaser equipment and solvents as well as unmatched industry expertise. **[Contact us](https://envirotechint.com/contact-us)** today to learn more about the benefits of vapor degreasing and find out what we can do for your manufacturing operation. ## Recent Posts ### [Let Enviro Tech Test Clean your Parts](https://envirotechint.com/let-enviro-tech-test-clean-your-parts/) September 18, 2026 Here at Enviro Tech International degreasing solvents are all that we do, and thus we understand the importance of a high quality standard for precision cleaning in the manufacturing process. We also understand that much thought goes in to deciding not just what products are selected for use in critical cleaning, but that the methods in which these products are to be used are equally important. [Let Enviro Tech Test Clean Your Parts](https://envirotechint.com/let-enviro-tech-test-clean-your-parts/) [![AA010176 - Enviro Tech International](https://envirotechint.com/wp-content/uploads/2022/01/72002-jpg.avif)](https://envirotechint.com/replacement-options-for-3m-novec-fluids-a-comprehensive-guide/) ### [Replacement Options for 3M Novec Fluids – A Comprehensive Guide](https://envirotechint.com/replacement-options-for-3m-novec-fluids-a-comprehensive-guide/) September 18, 2026 Overview With 3M’s complete phase-out of its Novec™ product line by the end of 2025, industries must rapidly identify alternative solutions to ensure process continuity,… [Replacement Options for 3M Novec Fluids – A Comprehensive Guide](https://envirotechint.com/replacement-options-for-3m-novec-fluids-a-comprehensive-guide/) [![page\_image - Enviro Tech International](https://envirotechint.com/wp-content/uploads/2022/03/page_image-jpeg.avif)](https://envirotechint.com/tce-perc-alternatives/) ### [Choosing the Right Alternative to Trichloroethylene or Perchloroethylene](https://envirotechint.com/tce-perc-alternatives/) September 5, 2026 NEXT-HD Pro is a replacement solvent for TCE and PERC. NEXT-HD Pro is Enviro Tech’s newest 1,2 trans blend using no HFC’s. This solvent blend is perfectly suited for vapor degreasing in modern equipment and general cleaning. Its solvency for hydrocarbon soils is superior to most similar high-trans fluorinated solvent blends. [Choosing the Right Alternative to Trichloroethylene or Perchloroethylene](https://envirotechint.com/tce-perc-alternatives/) [![Industrial Cleaning Beyond PERC](https://envirotechint.com/wp-content/uploads/2025/11/1762361585077-e1763149659160.avif)](https://envirotechint.com/industrial-cleaning-beyond-perc-how-to-future-proof-your-operations/) ### [Industrial Cleaning Beyond PERC: How to Future-Proof Your Operations](https://envirotechint.com/industrial-cleaning-beyond-perc-how-to-future-proof-your-operations/) September 2, 2026 Learn how to replace PERC safely and efficiently. Explore alternative solvents, technical criteria, and Enviro Tech solutions to future-proof industrial cleaning. [Industrial Cleaning Beyond PERC: How to Future-Proof Your Operations](https://envirotechint.com/industrial-cleaning-beyond-perc-how-to-future-proof-your-operations/) ### [Why Vapor Degrease? – Benefits of Vapor Degreasing](https://envirotechint.com/why-vapor-degrease-benefits-of-vapor-degreasing/) August 28, 2026 Learn more about the many benefits of utilizing vapor degreasing technology for your parts cleaning! [Why Vapor Degrease? – Benefits of Vapor Degreasing](https://envirotechint.com/why-vapor-degrease-benefits-of-vapor-degreasing/) [![TCE Alternative for Aerospace and Automotive Applications](https://envirotechint.com/wp-content/uploads/2025/11/1759168862860-jpeg.avif)](https://envirotechint.com/tce-alternative-for-aerospace-and-automotive/) ### [Engineering Guide: Selecting the Right TCE Alternative for Aerospace and Automotive Applications​](https://envirotechint.com/tce-alternative-for-aerospace-and-automotive/) July 14, 2026 Compare high-performance TCE alternatives for aerospace and automotive manufacturing. Learn how to transition solvents and explore Enviro Tech’s engineered replacements. [Engineering Guide: Selecting the Right TCE Alternative for Aerospace and Automotive Applications](https://envirotechint.com/tce-alternative-for-aerospace-and-automotive/) ### [How To Effectively Clean Your Machine Parts With Vapor Degreasing](https://envirotechint.com/how-to-effectively-clean-your-machine-parts-with-vapor-degreasing/) June 28, 2026 Precision parts manufacturing demands effective materials selection, minute attention to design details, precise tools and machines, and highly skilled labor. But even a microscopic speck or smudge of grease, oil or dirt on a part can render all of the above useless. For precision parts to fit together to the correct tolerances and for welds to hold, parts must be impeccably cleaned and free of all traces of contamination. Yet, operational efficiency also must be considered. The ideal cleaning system for parts will be both effective and economical. [How To Effectively Clean Your Machine Parts With Vapor Degreasing](https://envirotechint.com/how-to-effectively-clean-your-machine-parts-with-vapor-degreasing/) [![Safer Drop-In Alternatives to nPB for Precision Cleaning](https://envirotechint.com/wp-content/uploads/2025/11/1757958903405-e1763150838189.avif)](https://envirotechint.com/safer-drop-in-alternatives-to-npb-for-precision-cleaning/) ### [Safer Drop-In Alternatives to nPB for Precision Cleaning](https://envirotechint.com/safer-drop-in-alternatives-to-npb-for-precision-cleaning/) May 8, 2026 Learn how to replace PERC safely and efficiently. Explore alternative solvents, technical criteria, and Enviro Tech solutions to future-proof industrial cleaning. [Safer Drop-In Alternatives to nPB for Precision Cleaning](https://envirotechint.com/safer-drop-in-alternatives-to-npb-for-precision-cleaning/) [![baltoro1\_a\_vapor\_degreaser\_machine\_in\_a\_clean\_facility\_6fc5c9a9-538f-4264-97ce-2098f0e8ba3d](https://envirotechint.com/wp-content/uploads/2024/10/baltoro1_a_vapor_degreaser_machine_in_a_clean_facility_6fc5c9a9-538f-4264-97ce-2098f0e8ba3d-png.avif)](https://envirotechint.com/vapor-degreasing-services-guide/) ### [Vapor Degreasing Guide: Solvents, Cost, Compliance & How to Choose (2026)](https://envirotechint.com/vapor-degreasing-services-guide/) April 9, 2026 Everything manufacturers need to know about vapor degreasing — how it works, how to evaluate solvents, cost vs. aqueous cleaning, industry requirements, EPA compliance, and how to change solvents in existing equipment. [Vapor Degreasing Guide: Solvents, Cost, Compliance & How to Choose (2026)](https://envirotechint.com/vapor-degreasing-services-guide/) ### [Nonflammable And Fast-Drying Solvents For Cleaning Engines](https://envirotechint.com/nonflammable-and-fast-drying-solvents-for-cleaning-engines/) September 2, 2025 There’s no such thing as a foolproof engine. Even cleaning one can be hazardous if not handled with extreme care. Fortunately, you have options for nonflammable solvents and fast-drying solvents that can significantly reduce the chance of injury. [Nonflammable And Fast-Drying Solvents For Cleaning Engines](https://envirotechint.com/nonflammable-and-fast-drying-solvents-for-cleaning-engines/) [![Scientist in lab - Enviro Tech International](https://envirotechint.com/wp-content/uploads/2022/03/scientist-in-lab-2021-09-02-10-31-14-utc-scaled-jpg.avif)](https://envirotechint.com/how-to-transition-from-3m-novec-step-by-step-replacement-guide/) ### [How to Transition from 3M Novec – Step-by-Step Replacement Guide](https://envirotechint.com/how-to-transition-from-3m-novec-step-by-step-replacement-guide/) August 19, 2025 Overview  With 3M’s Novec™ product line being phased out by the end of 2025 and a final order deadline of March 31, 2025, manufacturers are… [How to Transition from 3M Novec – Step-by-Step Replacement Guide](https://envirotechint.com/how-to-transition-from-3m-novec-step-by-step-replacement-guide/) ### [Vapor Degreasing As A Cost-Effective Cleaning Method](https://envirotechint.com/vapor-degreasing-as-a-cost-effective-cleaning-method/) August 12, 2025 When selecting a parts cleaning method, facility managers must keep many factors in mind. One of the most pressing things to consider is the environmental impact of the method chosen, and the need to remain compliant with environmental protection regulations. However, cost containment is also always an essential consideration when selecting any industrial process. [Vapor Degreasing As A Cost-Effective Cleaning Method](https://envirotechint.com/vapor-degreasing-as-a-cost-effective-cleaning-method/) ```json {"@context":"https://schema.org","@graph":[{"@type":"Article","@id":"https://origin-www.envirotechint.com/five-questions-to-ask-when-choosing-the-location-for-a-vapor-degreaser/#article","isPartOf":{"@id":"https://origin-www.envirotechint.com/five-questions-to-ask-when-choosing-the-location-for-a-vapor-degreaser/"},"author":{"name":"joey colando","@id":"https://origin-www.envirotechint.com/#/schema/person/d876b337c9de300a61c2f3949070df7f"},"headline":"Five Questions To Ask When Choosing The Location For A Vapor Degreaser","datePublished":"2023-08-03T20:33:00+00:00","dateModified":"2024-12-09T03:45:18+00:00","mainEntityOfPage":{"@id":"https://origin-www.envirotechint.com/five-questions-to-ask-when-choosing-the-location-for-a-vapor-degreaser/"},"wordCount":1344,"commentCount":0,"publisher":{"@id":"https://origin-www.envirotechint.com/#organization"},"image":{"@id":"https://origin-www.envirotechint.com/five-questions-to-ask-when-choosing-the-location-for-a-vapor-degreaser/#primaryimage","url":"https://origin-www.envirotechint.com/wp-content/uploads/2022/03/qtq80-jxWvbS.jpeg"},"thumbnailUrl":"https://origin-www.envirotechint.com/wp-content/uploads/2022/03/qtq80-jxWvbS.jpeg","inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https://origin-www.envirotechint.com/five-questions-to-ask-when-choosing-the-location-for-a-vapor-degreaser/#respond"]}]},{"@type":"WebPage","@id":"https://origin-www.envirotechint.com/five-questions-to-ask-when-choosing-the-location-for-a-vapor-degreaser/","url":"https://origin-www.envirotechint.com/five-questions-to-ask-when-choosing-the-location-for-a-vapor-degreaser/","name":"Five Questions To Ask When Choosing The Location For A Vapor Degreaser - Enviro Tech International, Inc.","isPartOf":{"@id":"https://origin-www.envirotechint.com/#website"},"primaryImageOfPage":{"@id":"https://origin-www.envirotechint.com/five-questions-to-ask-when-choosing-the-location-for-a-vapor-degreaser/#primaryimage"},"image":{"@id":"https://origin-www.envirotechint.com/five-questions-to-ask-when-choosing-the-location-for-a-vapor-degreaser/#primaryimage"},"thumbnailUrl":"https://origin-www.envirotechint.com/wp-content/uploads/2022/03/qtq80-jxWvbS.jpeg","datePublished":"2023-08-03T20:33:00+00:00","dateModified":"2024-12-09T03:45:18+00:00","breadcrumb":{"@id":"https://origin-www.envirotechint.com/five-questions-to-ask-when-choosing-the-location-for-a-vapor-degreaser/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https://origin-www.envirotechint.com/five-questions-to-ask-when-choosing-the-location-for-a-vapor-degreaser/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https://origin-www.envirotechint.com/five-questions-to-ask-when-choosing-the-location-for-a-vapor-degreaser/#primaryimage","url":"https://origin-www.envirotechint.com/wp-content/uploads/2022/03/qtq80-jxWvbS.jpeg","contentUrl":"https://origin-www.envirotechint.com/wp-content/uploads/2022/03/qtq80-jxWvbS.jpeg","width":2160,"height":1440,"caption":"qtq80-jxWvbS - Enviro Tech International"},{"@type":"BreadcrumbList","@id":"https://origin-www.envirotechint.com/five-questions-to-ask-when-choosing-the-location-for-a-vapor-degreaser/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https://origin-www.envirotechint.com/"},{"@type":"ListItem","position":2,"name":"Five Questions To Ask When Choosing The Location For A Vapor Degreaser"}]},{"@type":"WebSite","@id":"https://origin-www.envirotechint.com/#website","url":"https://origin-www.envirotechint.com/","name":"Enviro Tech International, Inc.","description":"Industrial Cleaning Solvents & Services","publisher":{"@id":"https://origin-www.envirotechint.com/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https://origin-www.envirotechint.com/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https://origin-www.envirotechint.com/#organization","name":"Enviro Tech International","alternateName":"ETI","url":"https://origin-www.envirotechint.com/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https://origin-www.envirotechint.com/#/schema/logo/image/","url":"https://origin-www.envirotechint.com/wp-content/uploads/2022/04/ETI-Logo1v1.jpeg","contentUrl":"https://origin-www.envirotechint.com/wp-content/uploads/2022/04/ETI-Logo1v1.jpeg","width":1835,"height":449,"caption":"Enviro Tech International"},"image":{"@id":"https://origin-www.envirotechint.com/#/schema/logo/image/"},"sameAs":["https://www.facebook.com/envirotechint","https://x.com/EnviroTechInt","https://www.linkedin.com/company/enviro-tech-international-inc-/"]},{"@type":"Person","@id":"https://origin-www.envirotechint.com/#/schema/person/d876b337c9de300a61c2f3949070df7f","name":"joey colando","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https://secure.gravatar.com/avatar/b156c27d242029e08680db6094331637d04037a2fe6a8870e271a8f7c385a2bd?s=96&d=mm&r=g","url":"https://secure.gravatar.com/avatar/b156c27d242029e08680db6094331637d04037a2fe6a8870e271a8f7c385a2bd?s=96&d=mm&r=g","contentUrl":"https://secure.gravatar.com/avatar/b156c27d242029e08680db6094331637d04037a2fe6a8870e271a8f7c385a2bd?s=96&d=mm&r=g","caption":"joey colando"},"url":"https://origin-www.envirotechint.com/author/jcolando/"}]} ``` ```json { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://origin-www.envirotechint.com/" }, { "@type": "ListItem", "position": 2, "name": "Uncategorized", "item": "https://origin-www.envirotechint.com/category/uncategorized/" }, { "@type": "ListItem", "position": 3, "name": "Five Questions To Ask When Choosing The Location For A Vapor Degreaser", "item": "https://origin-www.envirotechint.com/five-questions-to-ask-when-choosing-the-location-for-a-vapor-degreaser/" } ] } ```